How to modify/edit tag in OpenERP?

I have only one solution for this problem.

1. First is to recognize the original record form of the group you want to edit. Let's use Figure 1 as the original record.

Figure 1

2. Next is we have to call the record and replace it with the fields and groups you want the form would look like. For instance, you want to remove the group tags and put the fields consecutively to the other. To do that, simply remove the group tags and change your record id as followed on the Figure 2.

Figure 2

: Notice that the group and separator tags has been removed and what is left are only the field tags. However, take a look at the colored underline. There is a change in the id and the name of the record. For the record id, 'base' is the module where the original record is placed while the 'view_partner_bank_form' is the original record id. When we do that, we are calling the original record and change it like the way we did in Figure 2. The name must also be changed to avoid XML conflicts.

How to setup the Method of Acquiring an IP address to DHCP setting?

The default of the method of aquiring an IP address in Buffalo router is PPPoE. This is only suitable for connections that require username and password. But for Skycable broadband, they do not. Because of that, we are going to use the DHCP setting. This part is very important. If you do not do this, your connection will not be successful.

How to change PPPoE to DHCP?

How to connect Buffalo Router to an ISP SkyCable broadband?

I know some of you find it difficult to understand computer technicalities most specially the non-IT users. However, there are also a few inexperienced IT(Information Technology) persons in terms of networking field. Even me at first, is confused with the configuration of connecting the Buffalo router from a Skybroadband internet connection since I am not in the networking field. There is a manual once you bought the router. But the steps may not be as accurate as what will appear on the setup stage. That's what happened to me and thereon I lost it. But because of some friends who is used to this kind of stuffs, I coped with it well. And believe me, the configuration was just too easy if I have known.  So here I am now, sharing it to everyone so that others who have no one to ask with may do it with themselves.

The router that I am using is Buffalo N150 and an ISP provider of SkyCable broadband. This will be an easy step.